S-2
04/2005
A COMMITMENT TO SAFETY
SandenVendo America is committed to safety in every aspect of our product design.
SandenVendo America is committed to alerting every user to the possible dangers
involved in improper handling or maintenance of our equipment. The servicing of any
electrical or mechanical device involves potential hazards, both to those servicing the
equipment and to users of the equipment. These hazards can arise because of improper
maintenance techniques. The purpose of this manual is to alert everyone servicing
SandenVendo America equipment of potentially hazardous areas, and to provide basic
safety guidelines for proper maintenance.
This manual contains various
warnings that should be carefully read to minimize the risk
of personal injury to service personnel. This manual also contains service information to
insure that proper methods are followed to avoid damaging the vendor or making it unsafe.
It is also important to understand these warnings are not exhaustive. SandenVendo
America could not possibly know, evaluate, or advise of all of the conceivable ways in
which service might be done. Nor can SandenVendo America predict all of the possible
hazardous results. The safety precautions outlined in this manual provide the basis for
an effective safety program. Use these precautions, along with the service manual, when
installing or servicing the vendor.
We strongly recommend a similar commitment to safety by every servicing organization.
Only properly-trained personnel should have access to the interior of the machine.
This will minimize the potential hazards that are inherent in electrical and mechanical
devices. SandenVendo America has no control over the machine once it leaves the
premises. It is the owner or lessor’s responsibility to maintain the vendor in a safe
condition. See Section I of this manual for proper installation procedures and refer to
the appropriate service manual for recommended maintenance procedures. If you have
any questions, please contact the Technical Services Department of the SandenVendo
America office nearest you.
SAFETY RULES
• Place and store unit inside. Outdoor use or storage voids warranty.
• Read the Safety Manual before installation or service.
• Test for proper grounding before installing to reduce the risk of electrical shock and
fire.
• Disconnect power cord from wall outlet or air dam before servicing or clearing product
jams. The vending mechanism can trap and pinch hands.
• Use only fully-trained service technicians for Power-On servicing.
• Remove any product prior to moving a vendor.
• Use adequate equipment when moving a vendor.
• Always wear eye protection, and protect your hands, face, and body when working
near the refrigeration system.
• Use only authorized replacement parts.
• Be aware of inherent dangers in rocking or tipping a vending machine.
To Next Page
Loading...
Need help?
General
