Vendo VUE 40 User Manual

P-12
03/2006
Free Counter:
This Mode will only display when ‘Free Vends’ were made. It allows the user access to
the number of ‘Free Sales and Cash Data’ lost.
1. Enter on Button 4 – Cash Data total XX.XX, which is the value of the money lost
based on the set price. This total is non re-settable and begins when the ‘Free Vend
Override’ is enabled.
2. Advance on Button 2 – ‘Sales Data Total X’, which is the total number of products
dispensed. This total is non re-settable and begins when the ‘Free Vend Override’ is
enabled.
3. Press Button 1 to exit.
Clearing the Cash Data, Sales Data, Discount Counter or Free Counter:
To reset the individual selection counter, scroll to the selection number, press and hold buttons
# 1 and 4 for 3 seconds, 0000 will display. You can also set ‘MIS Auto Reset ‘ to ‘On’ under
‘Conguration’
Set Price:
This Mode allows you the option to price each selection to the same vend price, or price each
shelf, tray or column. (Refer to diagram on next page)
To set all selections to a ‘single price’:
1. Enter on Button 4 – All Selections .XX will display (current vend price)
2.EnteragainonButton4–.XX(currentvendprice)willash
3. Advance on Button 2 to increase the price
4. Press Button 3 to decrease the price
5. Press Button 4 to save change
6. Press Button 1 to exit.

Vendo VUE 40 Specifications

General

Brand	Vendo
Model	VUE 40
Category	Vending machines
Language	English