Vendo VUE 40 User Manual

P-21
03/2006
TempLO (Temperature Lock Out):
1.Enabletimingfeatureinconguration
2. Advance on button 2 to TempLO shlf 1
3.PressButton4–Disablewillash
4. Advance on Button 2 – Enable
5. Press Button 4 to ‘save’ setting
6. Continue in above manner for all shelves associated with Temperature Lockout
Note: The Temperature Lockout Feature (TempLO) requires an additional temperature sensor
connected at the top left on the inside of the cabinet. When the cabinet temperature is above
41ºF/ 3.5 ºC for more then 15 minutes, the vendor will shut down any shelves associated with the
Temperature Lockout Feature.
Sales Block: (8 Blocks are available in this Mode)
Sales Block allows the operator to turn Selections On/Off at 8 intervals during a 24-hour period.
Times must not overlap. You must enter the following information:
Selections – the selection buttons that will be disabled during the blocked time
Start Time – the time selections will be ‘Off Line’
Start Days – the days selections will be ‘Off Line’
Stop Time – the time selections will turn back ‘On’
Stop Days – the days selections will turn back ‘On’
Sales Block 1 – 8 Cont’d:
Sales Block 1:
1. Press Button 4 – Enable On/Off, Light
Enable Off – Block Function is disabled
Enable On – Block Function is enabled
Enable Light – Block Function is enabled and lights are off when blocking occurs
2.PressButton4–On/OffLightashes
3. Press Button 2 to advance to desired setting
4. Press Button 4 to ‘save’ setting – your choice will display
5. Press Button 2 to advance to – Selections

Vendo VUE 40 Specifications

General

Brand	Vendo
Model	VUE 40
Category	Vending machines
Language	English