EasyManuals Logo

Ventrac 4500P User Manual

Ventrac 4500P
87 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Service - 45
SERVICE
WARNING
Always engage the parking brake, shut o the pow-
er unit engine, remove the ignition key, and ensure
that all moving parts have come to a complete stop
before inspecting the components or attempting
any repair or adjustment.
ATTENTION
Ventrac recommends that service of the power unit
be performed by a qualied technician. If you are
unsure how to perform the service procedure(s),
contact your Ventrac dealer.
ATTENTION
If any component requires replacement, use only
original Ventrac replacement parts.
Service and General Maintenance
Proper and timely service of this power unit is critical
to keep the power unit in a safe and reliable operating
condition. Follow the maintenance schedule at the
end of the service section. For convenience, a fre-
quent service guide decal and a quick reference decal
have been placed on the power unit under the hood.
Cleaning and Appearance Care
For best results, and to maintain the nish of the
power unit, clean or wash the power unit to remove
accumulated clippings, leaves, dirt, gravel, and salt
deposits when the job is nished.
ATTENTION
To maintain the nish of the power unit, thoroughly
wash the equipment after each use to remove any
corrosive agents (e.g. salt). Failure to clean the
equipment may result in corrosion of (including but
not limited to) steel, aluminum, and electrical com-
ponents. Equipment that will experience repeated
exposure to corrosive agents should be pretreated
with a corrosion preventative.
CAUTION
If the engine has been running, it must be allowed
to cool in order to prevent damage to the block and
the exhaust manifold.
Do not direct high pressure water at the engine, air
cleaner, muer, radiator, hydraulic oil cooler, or any
electrical components.
Allow the power unit and all components to cool be-
fore washing. Refer to the specic service sections for
proper cleaning techniques for the engine, radiator,
and hydraulic oil cooler. Use mild soap and water to
clean the power unit. Harsh chemical cleaners could
cause damage to the nish or the components.
It is necessary to periodically remove the lower rear
frame cover and blow out or wash out any accumu-
lated debris.
After cleaning, use touch up paint to repair any chips
or scratches.
https://www.tractormanualpdf.info/

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ventrac 4500P and is the answer not in the manual?

Ventrac 4500P Specifications

General IconGeneral
BrandVentrac
Model4500P
CategoryUtility Vehicle
LanguageEnglish

Related product manuals