Introduction - 7
INTRODUCTION
Product Description
The Ventrac 4500 tractor combines all wheel drive and an articulating chassis with a low center of gravity to
provide superior traction, braking, stability, and security on tough terrain and slopes without disturbing turf
when turning. The attachment is placed out in front in a natural view, oering greater precision, as well as
maximum protection for the operator.
Ventrac’s patented SDLA control, located next to the operator, allows for easy control of Speed, Direction, Lift,
and Auxiliary functions with one hand.
Standard features include:
• a fold down roll bar.
• a computer controlled onboard diagnostic system for the electrical circuits.
• a wiring harness that is pre-wired for optional accessories.
• an electronic instrument panel that includes a tachometer, speedometer, fuel gauge, hour meter, and tem-
perature gauge.
• a six function warning gauge and alarm that includes the engine coolant temperature, hydraulic oil tem-
perature, engine oil temperature, low voltage, low engine oil pressure, and a parking brake indicator.
• a complete electrical system circuit breaker and battery disconnect.
• an automotive pull style parking brake.
• a hydraulic oil cooler with a thermostatically controlled, reversible fan.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely operate,
maintain, and service your machine. It is divided into sections for convenient reference of the appropriate sec-
tion.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own. Reading
the operator’s manual will help you become familiar with each specic piece of equipment. Understanding
the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the equipment.
Keep this manual with the machine at all times. The manual should remain with the machine even if it is sold.
If this manual becomes damaged or unreadable, it should be replaced immediately. Contact your local Ventrac
dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both the
power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine while
getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual may
result in personal injury and/or damage to the equipment.
Venture Products Inc. is pleased to provide you with your new
Ventrac power unit! We hope that Ventrac equipment will provide
you with a ONE Tractor Solution.
Please visit our website, or contact your authorized Ventrac
dealer for a complete list of items available for your new power
unit.
https://www.tractormanualpdf.info/
To Next Page
Loading...
