Special Tools
Special tools for servicing Ventrac Commercial Products are available from your
Ventrac dealer. Some of these tools are available as Ventrac parts or may also be
available from a local tool supplier.
Multimeter
Obtain this tool locally
The meter can test the electrical
components and circuits for current,
resistance, or voltage.
Note: Use a digital multimeter when
testing the electrical circuits. The high
impedance (internal resistance) of a
digital meter in the voltage mode
ensures that the excess current is not
allowed through the meter. This excess
current can damage the circuits that are
not designed to carry it.
VC-3 Thread Locker
Ventrac Part No. 15.0046
VC—3 thread locker is used on exhaust
manifold mounting bolts.
ECOM Diagnostic Tool
Ventrac Part No. 72.0055
The ECOM Diagnostic tool is used for
engine diagnostics on the 4520N
machine.
Specifications: Special Tools Page 2–18 4520Z
09.40001Rev 00
To Next Page
