Exhaust System (continued)
4520Z Removing the Exhaust System
CAUTION
The engine and exhaust system may be hot. To avoid possible burns, allow the
engine to cool before working on the engine.
1. Remove attachments from the machine.
2. Park the machine on a level surface, engage the parking brake, and remove the
key from the ignition.
3. Remove the hood and grill assembly; refer to Removing and Installing the Hood,
page 7–13 Removing and Installing the Grill, page 7–14.
4. Remove the right engine cover; refer to Removing and Installing the Engine
Covers, page 7–14.
5. Remove the fasteners securing the heat shield to the exhaust manifold.
6. Remove the fasteners securing the heat shield to the muffler.
7. Remove the fasteners from the muffler mounting bracket.
8. Remove the fasteners from the muffler and exhaust manifold. Retrieve and
discard the exhaust gasket.
9. Continue and remove the exhaust manifold as needed refer to Engine Service
Manual.
10. Remove any gasket material from the muffler, manifold, or cylinder head.
Engine: Engine Service and Repairs Page 4–6 4520Z
09.40001Rev 00
To Next Page
