Engine Cooling System (continued)
4520Z Removing the Radiator
DANGER
If the radiator or engine is hot, pressurized hot coolant can escape and cause
burns. Do not open the radiator cap or drain the radiator when the radiator or
engine is hot.
WARNING
Ethylene-glycol antifreeze coolant is poisonous. Keep the coolant away from
children and pets. Keep the coolant in a labelled container. Discard the coolant
in accordance with local hazardous waste ordinances.
1. Remove attachments from the machine.
2. Park the machine on a level surface, engage the parking brake, and remove the
key from the ignition.
3. Raise the hood and remove the radiator screen.
4. Remove the left and right engine covers; refer to Removing and Installing the
Engine Covers, page 7–14.
5. Remove the air inlet cover and air box mounting bolt; refer to 4520Z Removing
and Installing the Air Cleaner System, page 4–4.
6. Drain the coolant.
7. Disconnect the upper and lower radiator hoses from the radiator.
8. Remove the radiator mounting bolts.
9. Remove the radiator from the machine.
10. Inspect the radiator isolator mounts and replace as necessary.
Engine: Engine Service and Repairs Page 4–16 4520Z
09.40001Rev 00
To Next Page
