4.2.6 Login Screen
The Login screen provides further access to information and the ability to adjust various parameters and settings when
logged in at the Service or Engineer level.
User Level Code Description
User Level 1 No access code. Provides access to Login, Status, Data Curves, and Alarm pages.
1234 User Level 2 Provides read only access to Setup, Configuration, and Diagnostic menus.
XXXX Service Level Provides full read only access to everything and write access to select configuration and service
features.
XXXX Engineer Level Full read/write access to all features.
Table 4.8 Login Screen Access
Figure 4.6 Control System Login Screen
Login codes are available upon request from Vertiv. Entering an invalid code will result in an Access Denied message.
After you are logged in, the Logout icon will replace the Login icon. See Figure 4.2 on page17 .
24 Proprietary and Confidential ©2025 Vertiv Group Corp. 4 Operation
Vertiv™ CoolChip CDU 600 Operation and Maintenance Guide
To Next Page
Loading...
