1.2 Installation/Handling
WARNING! Risk of improper wiring, piping, moving, lifting and handling. Can cause serious injury or death.
Building and equipment damage may also result. Installation and service of this equipment should be done
only by qualified personnel who have been specially-trained in the installation of air-conditioning equipment
and who are wearing appropriate, OSHA-approved PPE.
WARNING! Risk of improper moving. Can cause serious injury or death. Building and equipment damage may
also result. Use only lifting equipment that is rated for the unit weight by an OSHA-certified rating
organization. Shipping weights and unit weights are provided in the Application and Planning Guide.
WARNING! Risk of top-heavy unit falling over when improperly lifted or moved. Can cause serious injury or
death. Building and equipment damage may also result. Read all of the following instructions and verify that
all lifting and moving equipment is rated for the weight of the unit before attempting to move, lift, remove
packaging from or prepare the unit for installation. Unit weights are specified in the Application and Planning
Guide.
WARNING! Risk of unsecured unit falling off pallet. Can cause serious injury or death. Building and equipment
damage may also result. The unit is on casters. Ensure that the unit and pallet is located on a flat surface
before loosening the hardware securing the unit to its shipping pallet.
CAUTION: Risk of contact with sharp edges, splinters and exposed fasteners. Can cause injury. Only properly
trained and qualified personnel wearing appropriate, OSHA-approved PPE should attempt to move, lift,
remove packaging from or prepare the unit for installation.
NOTICE
Risk of passageway interference. Can cause unit and/or structure damage. The unit may be too large to fit
through a passageway while on or off the skid. Measure the unit and passageway dimensions, and refer to the
installation plans prior to moving the unit to verify clearances.
NOTICE
Risk of passageway interference. Can cause unit and/or structure damage. The unit may be too large to fit
through a passageway while on or off the skid. Measure the unit and passageway dimensions, and refer to the
installation plans prior to moving the unit to verify clearances.
Installation and operation must be conducted in accordance with local and national regulations and normal codes of good
practice. When moving or lifting the product, caution must be observed to ensure the safety of personnel. Only the
appropriate lifting equipment must be used.
1.3 Application
This product is for indoor use only and must be used only for the application it was designed for in consultation with Vertiv.
This product must not be used in a hazardous environment.
1 Important Safety Information Proprietary and Confidential ©2025 Vertiv Group Corp. 5
Vertiv™ CoolChip CDU 600 Operation and Maintenance Guide
To Next Page
Loading...
