Battery Test
It will show “Battery Test” if the UPS is not in test. Touch “Yes” to start battery test. Then, it will show Battery testing during
battery test period. After few seconds, battery test result will show on the screen. Touch “Back” to return to main screen
immediately or “No” to cancel this operation and back to main screen (screen 0.0).
It will show “Cancel battery test” if the UPS is in test.
Figure 3.15 Battery Test Screen
Figure 3.16 Cancel Battery Test Screen
38 Proprietary and Confidential ©2024 Vertiv Group Corp. 3 Operations
Vertiv™ Liebert® MTP Online UPS User Manual 20-40-80kVA
To Next Page
Loading...
