Vertiv Liebert APS series User Manual

3.5.1 Tower Installation
1. With the UPS in the installation location, adjust the leveling feet to secure its position, as shown
in Figure 3.3 below.
a. Use an open end wrench to turn the lower nut to raise or lower the leveling foot.
b. After the unit is level, tighten the upper nut against the frame to prevent the height from
changing.
Figure 3.3 Adjust the leveling feet
ITEM DESCRIPTION
1 Upper nut
2 Lower nut
Vertiv | Liebert® APS™ Installer/User Guide | 25

Vertiv Liebert APS series Specifications

General

Brand	Vertiv
Model	Liebert APS series
Category	UPS
Language	English