Vertiv Liebert XDC User Manual

Figure 6.30 Diagnostics/Service mode, page 5 of 6
Status Remote Shutdown—Displays the status of the unit’s remote shutdown input.
Status Fan Failure—Displays the status of the dry contact to communicate fan failure at a module. (The
dry contacts are not used to communicate a fan failure alarm when using CANbus.)
Status Diff Press Switch 1—Displays the status of the differential pressure switch.
Status Customer Input 1—Displays the status of the customer input 1 alarm.
Status Condensation Detect—Displays the status of the dry contact to communicate condensate
detection at a module.
Status Unit Ready—Shows unit status when a secondary device, such as a fire detection system, is
employed.
Vertiv | Liebert® XDC™ User Manual | 93

Vertiv Liebert XDC Specifications

General

Brand	Vertiv
Model	Liebert XDC
Category	Freezer
Language	English