Verve PANTERA - Installing the Saddle

6.6.
Screw all the 7 Allen screws without tightening them.
Installing the saddle
To perform all next operations we recommend you have the e-bike standing on the wheels.
6x 5x30mm screws
When all the screws are in place, tighten them firmly and make sure the saddle is fully stabilized.
Follow the steps below:
Place the saddle on top of the frame so that it is aligned with the corresponding fixing slots.
The saddle must be attached to the frame with the supplied 7 Allen screws:
1x 5x50mm front screw
20