Never immerse the battery or the charger in water or in other fluids and do not touch them with wet hands. If the
connectors are wet, do not connect the battery or the charger under any circumstances.
Always charge the battery in a dry place, humidity should not exceed 15-30%. When fully charged, remove the battery
from the charger. Keep the battery sheltered from heat sources or dangerous gases.
To charge the battery, use the supplied charger. Using unsuitable chargers may provoke damages, fires and
explosions.
Prevent the battery and the charger from shocks or falls.
Do not put any item on the charger when charging, this may provoke overheating or fires.
Do not try to charge a defective battery and never use damaged cables.
Pantera is equipped with a latest-generation battery which is sheltered by a special waterproof protective cover. Do
not open the cover under any circumstances.
Battery and charger safety instructions
Use utmost care to connect the charger to the battery and to the power outlet, without stretching or tangling the
cables. An inappropriate connection may provoke overheating or fires.
Remove immediately the battery from the e-bike if you spot any damage in the electrical system.
Store both the battery and the charger in a dry place, sheltered from [direct] solar light and other heat sources.
Faulty connections may provoke arc flashes and/or electric shocks. Keep the connectors dry and clean and make sure
they are perfectly working. Never insert any metal object into the connectors and do not try to tamper with them in
any way.
Do not perform any intervention on the battery or on the charger for any reason. All the operations on the battery are
potentially dangerous. In case of a battery malfunction, always see a professional bicycle service. Tampering with the
battery may provoke damages to the cells and/or to the BMS [Battery Management System] and may result in serious
injuries or death to the user and/or those around them.
To Next Page
Loading...
