The frequency of maintenance considerably depends on how the e-bike is used and on the weather conditions. Cold
temperatures, rain, unpaved roads etc. can require more frequent maintenance interventions.
Verify that the wheel hub, the handlebar and all the parts subjected to friction are properly lubricated.
Check the tyres condition and pressure.
Verify the proper functioning of the handlebar. In particular, inspect a possible unsteadiness.
Inspect the suspension components and make adjustments, when necessary.
Lubricate the chain and check its tension and wear.
Verify the proper functioning of the braking system: discs, pads, cables.
We recommend you follow this maintenance schedule in order to keep your e-bike efficient and to always ride safely.
Removed self-locking nuts must be replaced. If you remove screws and nuts tightened with thread sealant
paste, they must be reinstalled and tightened the same way.
Oils, lubes, detergents, brake fluids etc. must be properly disposed of according to to the specific national
legislation. We recommend you respect the safety regulations, when using these substances. Waste oil must
no way be dispersed in pipes or in the environment.
Inspect with utmost care the whole frame and the front fork to verify the presence of cracks, even small-sized.
Check all the screws and nuts of your e-bike and tighten them, when necessary.
Always accurately perform the “Pre-ride safety checks” specified in section 11.1 in this manual.
To Next Page
Loading...
