The braking system includes the following elements:
Plastic sleeves with an anti-seize PTFE internal coating.
Brake caliper: it is installed on the frame and requires specific mounts and adapters to be set. In the case of
mechanical systems, a series of leverages converts the wire action into the horizontal translation of the pads.
Disc brakes have several benefits: they provide a better heat dissipation; they are more adjustable so as to reduce the risks
of losing grip; they are more powerful than traditional brakes; they maintain a very good level of braking performance even
in case of adverse weather conditions; they are easier to set.
Disc brakes require bedding to ensure an optimal breaking performance and it is possible for the braking power
to be lower during the break-in. So we recommend you ride carefully during this time.
The disc brake can reach high temperature while riding. After a ride, always wait a few minutes before
touching the rotors because you might get burnt.
Pantera as standard features mechanical disc brakes, also called threaded brakes, which combine the typical disc brakes
structure with the functionality of traditional brakes. Pads are activated by a wire (1,6mm stainless steel) which triggers
some leverages drawing the pads themselves to the rotor (commonly called a disc).
Brake lever: located on the handlebar, it activates the wire.
simply focus on riding your e-bike. The weight of the battery (located on the downtube) and of the motor (located on the
freehub) affects the barycentre of the bicycle. So we recommend you ride carefully and remember that, in spite of being
accurately designed, the e-bike has a different manoeuvrability than a normal bicycle.
To Next Page
Loading...
