Verve PANTERA - Opening the Box and Removing the E-Bike and Its Parts from the Box

6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.1.
Installing the pedals
Installing the front wheel
ASSEMBLY OPERATION INDEX
Installing the handlebar
Removing the battery
Opening the box and removing the e-bike and its parts from the box
In order to protect the e-bike from possible damages, all the parts have been covered with polyurethan foam.
Opening the box and removing the e-bike and its parts from the box
Use a staple remover to open the top box. Before removing the bike, use a wire cutter or a pair of scissors to
cut the cable tie connecting the front wheel and the frame.
Pantera e-bike weighs about 30kg. So we recommend you carry out this task with the help of another person.
First of all, make sure the box is placed on the right side. You can easily check the orientation arrows printed on the box
sides.
Remove carefully the front wheel from the box. Pay attention not to damage the disc brake or any other part of the e-bike. A
damaged disc may hinder the assembly and provoke serious safety issues.
You can now lift your e-bike out of the box with the same care.
Installing the front headlight
Installing the saddle
Inflating the tyres
12