Verve PANTERA - Installing the Front Headlight

Follow the steps below:
Installing the front headlight
1 x 2x10mm Allen key
Tighten both brackets with the supplied Allen screws.
6.8.
1 x 10mm wrench key
Verify the brackets are installed at the same height.
To attach the headlight and the grid, place the headlight between the two support brackets and use the 2x10mm
Allen key.
To install the front headlight you need the following supplied tools:
1 x 2x8mm Allen key
Drop the headlight brackets in the right and left fork stem (of your e-bike).
Use the specific connectors to wire the headlight to the electrical system of your e-bike.
22