Verify that the display turns on and works properly.
Verify that the handlebar is firmly in place. If not, tighten all the four retaining screws.
It is essential to do a safety inspection before riding your e-bike, following the steps below.
After turning on the e-bike, the assistance will supply energy as soon as you place your feet on the pedals.
There are no lag-times thanks to the advances dual-sensor system which combines torque sensor and
cadence sensor, granting a unique driving experience.
Verify that the battery is correctly inserted into its specific emplacement on the frame.
Check the battery charge on the Led indicator or your e-bike display.
Check if the headlight and the rear light are properly working. Lights must always be visible; keep them clean and
avoid carrying objects which may partially or entirely cover them.
We recommend you pay the utmost attention to the safety instructions reported hereafter. Improper behavior
or neglecting regularly doing safety checks may provoke damages to the e-bike and may result in accidents,
serious injuries or death to the cyclist and/or those around them.
To Next Page
Loading...
