Cleaning an e-bike requires more specific care than a normal bicycle. First of all, remove the battery and cover the display
before any washing. Use specific detergents only. Rinse thoroughly to avoid any contact with chemical residues and always
dry the e-bike after washing to prevent humidity or possible rust from spoiling the components.
LED lights do not require any specific maintenance and have no replaceable components (such as bulbs).
Should the lights stop working properly (partially or entirely), the whole light need replacing.
In order to ensure you maximum safety. Pantera is equipped with a 5 ¾ Full LED headlight and a LED rear light which will
always ensure you a perfect visibility in all conditions.
Lights must always be visible; keep them clean and avoid carrying objects which may partially or entirely cover
them.
In case of a simple, ordinary cleaning – meaning there are no mud nor salt – you can just clean your e-bike with a dry rug
and a paintbrush to reach the most hidden parts.
Many components of your e-bike are subject to wear, especially when affected by dust, rust, humidity, mud etc. A clean bike
will allow you ride without useless frictions and will reduce the battery drain. That is why we suggest you regularly clean
your e-bike.
To Next Page
Loading...
