EasyManua.ls Logo

Verve PANTERA - Wheels and Tyres Maintenance

Default Icon
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Verify that the wheels are perfectly centred and that the derailleur is perfectly set.
A common replacement kit should include:
One of the most common problems in cycling is puncture. We suggest you get equipped with a kit to repair or
replace a damaged inner tube and always bring it with you, especially when planning a long hike.
2 tyre levers (to take the tyre off the rim), 1 inner tube patch kit, 1 quick setting mastic tube, 1 can of
compressed air (or 1 mechanical pump) and a suitable coupling, 1 coupling for can of compressed air, 1 keys
set.
If you reckon you cannot properly perform the operations described above, please see a professional bicycle
service.
Make sure the wheels clamping nuts are properly tightened.
Verify that both tyres show no cracks, punctures and deformations.
9.2.
Make the following checks:
Should a tyre look noticeably worn out, we recommend you replace it without delay.
tyre levers (to take the tyre off the rim), 1 spare inner tube, 1 can of compressed air and a suitable coupling, 1
keys set
Pantera e-bike is equipped with 20”x4” FAT tyres inner tube mounted on 5 spokes aluminium alloy rims.
Wheels and tyres maintenance
A common repairing kit should include:
Check that the tyres pressure does not to exceed the 20-25 PSI (1,3-1,7 bar) recommended value. For a correct tyres
inflation see section 6.5 in this manual.
36

Related product manuals