Verve PANTERA - Installing the Front Wheel

1.
6.4.
1. Pull out the nut and the retaining washer from both sides of the wheel while keeping the spacer in place.
Installing the front wheel
First of all, remove the plastic clip between the brake pads inside the brake caliper. Use the provided tools to loosen
and remove both M6 Allen screws from the caliper mount. Memorize the right position of the parts you are removing
from the caliper mount, taking specific care about the emplacement of washers, of the spacer on the retaining screws
and of the caliper mount.
Follow the steps below:
To ensure a perfect installation of the front wheel, we recommend you flip the e-bike. We also suggest you place soft
protectors under points A and B to protect your e-bike from bumps and/or scratches, as shown in the picture.
2.
16