Vespa LX 2012 User Manual

- The main bushings have 2 half-bearings, 1 with
and 1 without the lubrication channel.
- The solid half-bearing is intended to stand the
thrusts caused by combustion, and for this reason
it is arranged opposite the cylinder.
- To prevent shutters in the oil feeding channels,
the matching surface of the two half-bearings must
be perfectly orthogonal to the cylinder axis, as
shown in the photo.
Characteristic
«A»
AXIS CYLINDER
BUSHINGS
TYPE
IDENTIFICATION CRANKSHAFT HALF-BEARING
B BLUE 1.971 to 1.976
C YELLOW 1.974 to 1.979
E GREEN 1.977 to 1.982
Characteristics Vespa LX - S 125 3V ie 150 3V ie (2012)
CHAR - 18

Vespa LX 2012 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	124 cc
Cooling System	Air-cooled
Fuel System	Carburetor
Transmission	Automatic CVT
Fuel Tank Capacity	8.6 liters
Seat Height	785 mm
Curb Weight	114 kg
Length	1, 770 mm
Width	705 mm
Height	1, 140 mm
Max Power	10.3 hp @ 7, 750 rpm
Front Suspension	Single arm with coil spring and hydraulic shock absorber
Front Brake	200 mm
Rear Suspension	Coil spring and hydraulic shock absorber
Rear Brake	110 mm drum