Vespa LX 2012 - Page 17

CRANKSHAFT
Specification
Desc./Quantity
Crankshaft bearings: Standard diameter: Cat. 1 26.998 to 27.004 mm
Crankshaft bearings: Standard diameter: Cat. 2 27.004 to 27.010 mm
- To obtain a good bushing lubrication it is necessary to have both an optimal lubricating pressure and
a good oil flow rate; the bushings must be correctly positioned so as not to obstruct the oil supply
channels.
Characteristic
«A»
AXIS CYLINDER
Vespa LX - S 125 3V ie 150 3V ie (2012) Characteristics
CHAR - 17