- Remove the mounting bracket of the throttle con-
trol cables undoing the two fixing screws.
- Release the cable ends of the throttle body pul-
ley.
- Remove the throttle body with air cleaner joint,
manifold and injector.
Refitting the butterfly valve
For refitting, perform the steps in the reverse di-
rection to disassembly taking care to orientate the
air cleaner joint by inserting it in the reference tooth
on the throttle body as shown in the picture.
- To adjust the throttle control cables, act on the
specific adjuster screws.
Injection Vespa LX 125 - 150 i.e.
INJEC - 160
To Next Page
Loading...
