Videotec DCJ - Page 160

Page 30
MNVADCJ01_1729_EN
After selecting the  matrix type, with the cursor on the  line, press  to enter the special menu:





Selecting a configuration will
automatically enable all cameras and all monitors present in the system.
5.3.4.1 Controlling parallel matrixes
Position the cursor on the line and press . Insert the number of parallel matrixes present in the
system (from 2 to 9).
This selection enables:
 Cameras of the matrix connected to the keyboard: from 1 to 32
 Cameras of the other matrixes in the system:
- 101-132, 201-232;
-
301
-33
2 if matrix number 3 is present;
-
401-43
2 if matrix number 4 is present;
-
501-53
2 if matrix number 5 is present;
-
601-63
2 if matrix numbe
r 6 is present;
-
701
-73
2 if matrix number 7 is present;
-
801-83
2 if matrix number 8 is present;
-
901-93
2 if matrix number 9 is present.
 Monitors of all the matrixes in the system: from 1 to 8.
After choosing this configuration the video communications menu will show
.
5.3.4.2 Controlling master/slave matrixes
Keyboard connected to the master matrix
Position the cursor on the
 line and press . Insert the number of slave matrixes present in the
system (from 1 to 4).
This selection enables:
 cameras:
- if there is 1 slave matrix connected: 1-28 (matrix connected to the keyboard)
and 101-132 (slave matrix)
-
if there are 2 slave matrix
es connected: 1-24 (matrix connected to the keyboard),
101-132 (slave 1), 201-232 (slave 2)
- if there are
3 slave matrixes connected: 1-20 (matrix connected to the keyboard),
101-132 (slave 1), 201-232 (slave 2), 301-332 (slave
3)
-
if there are 4 slave matrix
es connected: 1-16 (matrix connected to the keyboard),
101-132 (slave 1), 201-232 (slave 2), 301-332 (slave 3), 401-432 (slave 4).
 Monitors of the master matrix: from 1 to 8.
After choosing this configuration the video communications menu will show
.
Keyboard connected to a slave matrix
Position the cursor on the  line and press
. No parameters are required.
 Cameras of the matrix connected to the keyboard: from 1 to 32
 Monitors of the matrix connected to the keyboard: from 1 to 4.
After choosing this configuration the video communications menu will show
.