Page 65
MNVADCJ01_1729_EN
6.4 Notes regarding telemetry control
6.4.1 Special codes
The DCJ keyboard can be used to control a considerable number of telemetry functions, and to recall some of
these there are no suitable key combinations.
They can therefore be activated by using the following procedure:
press the key
insert the numeric code corresponding to the required function and confirm with
.
The
key cancels the code insertion operation.
6.4.2 Typographical conventions
The indication (min÷max) means that it is possible to insert numeric codes between
the specified min and max limit: for example
(0÷19) means that it is possible to
insert special codes from 2000 to 2019. For each
symbol, a numeric digit should be inserted.
The terms “Video programming”, “On Screen Menu” and “OSM” should be considered equivalent: in the dome
user’s manual these terms are interchangeable.
To Next Page
Loading...