Viessmann GC1 - Setting the Room Temperature

22
Ú
Htg circ. selection HC2
Was selected
Heating circuit 2
Ù
Ú
HC2Heating circuit 1
Set reduced room temp
Set room temperature
Economy mode
Party mode
Ù
Ú
HC1
Continue with OK
ê
ê
Ù
Ú
HC1
Setting the room temperature
Setting the room temperature for
standard heating mode
Factory setting: 20 °C
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 21).
4. "Set room temperature"
5. Set the required value.
Setting the room temperature for
reduced heating mode (night set-
back)
Factory setting: 3 °C
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 21).
4. "Set red. room temp"
5. Set the required value.
The rooms are heated to this tempera-
ture:
■ Between the time phases for standard
heating mode (see page 23).
■ In the holiday program (see
page 27).
Setting the heating program for central heating
Factory setting: "Heating and DHW"
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 21).
4. "Heating program"
5. "Heating and DHW"
Central heating
Selecting a heating circuit
(cont.)
5592 675 GB