Viessmann GC1 - Stopping DHW Heating

32
Deleting a time phase
Set the time for the end point to the same
time that was set for the start point. The
display shows the selected time phase
"- - : - -".
DHW circulation
Adopt with
HC1
§
u
0 2 4 6 8 10 12 14 16 18 20 22 24
?
- -:- - - - -:- -
u
---
---
Mo-Fr
- -:- - - - -:- -
OK
Stopping DHW heating
You do not want to have DHW or heat
your rooms.
Extended menu
1.
2. Select the heating circuit if necessary
(see page 21).
3. "Heating"
4. "Heating program"
5. "Standby mode" (frost protection
monitoring)
You do not want DHW, but do want to
heat the rooms.
Extended menu
1.
2. Select the heating circuit if necessary
(see page 21).
3. "Heating"
4. "Heating program"
5. "Heating and DHW"
6. until the menu is displayed.
7. "DHW"
8. "Set DHW temperature"
9. Select 10 °C.
DHW heating
Setting the time program for DHW heating
(cont.)
5592 675 GB