Viessmann GC1 - Terminology

52
Heating circuit 2, 3 (HC2, HC3)
"Heating program"
■ "Screed function"
■ "External hook-up"
■ "Holiday program"
■ "External program"
■ "Party mode"
■ "Economy mode"
■ "Heating and DHW"
■ "Only DHW"
■ "Standby mode"
"Operating status:"
■ "Standard heating mode"
■ "Reduced mode"
■ "Standby mode"
"Time program"
"Set room temperature"
"Room temperature"
"Set red. room temp"
"Set ext. room temp"
"Set party temp"
"Slope"
"Level"
"Heating circ pump"
"Mixer"
"Flow temperature"
"Return temperature"
"Holiday program"
DHW
"DHW time prog"
"DHW circ time prog"
"DHW temperature"
or
In conjunction with 2 cylinder temper-
ature sensors:
"DHW temp top"
"DHW temp bottom"
"Cylinder prim pump"
"DHW circ pump"
Solar
"Collector temp"
"Solar DHW"
"Solar circuit pump" (hours run)
"Solar energy history"
"Solar energy"
"Solar circuit pump" (ON/OFF)
or
"Solar circ pump speed"
"Heating suppr. DHW"
"SM1 output 22" (ON/OFF)
"SM1 output 22" (hours run)
"Sensor 7"
"Sensor 10"
"Heat suppr. heating"
Terminology
Setback mode (reduced heating
mode)
See "Reduced heating mode".
Building drying
Your heating contractor can, for exam-
ple, enable the "Screed function" for
your new installation or fitting for building
drying. With the screed function, your
screed is dried in line with the building
material according to a fixed time pro-
gram (temperature/time profile).
Appendix
Menu overview Vitotronic 300-K
(cont.)
5592 675 GB