Viessmann GC1 - Comfort and Energy Saving Functions; Selecting Energy Saving Function Economy Mode

27
Make the settings for the energy saving
function at the Vitotronic 300-K.
To save energy, you can reduce the
room temperature in standard heating
mode. For example, if you want to leave
your home for a few hours.
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 21).
4. "Economy mode"
Heating circuit 1
Set reduced room temp
Set room temperature
Economy mode
Party mode
Ù
Ú
HC1
Continue with OK
ê
ê
Ending economy mode
■ Automatic when the system switches
to reduced heating mode in accord-
ance with the time program.
or
■ In the extended menu, set "Economy
mode" to "OFF".
Selecting energy saving function "Holiday program"
To save energy, for example over long
holidays, you can activate the "Holiday
program".
Make the settings for this energy saving
function at the Vitotronic 300-K.
Note
The control unit is set up so that the hol-
iday program applies to all heating cir-
cuits. If you want to make changes, con-
tact your local heating contractor.
The holiday program has the following
effect on the heating circuits and DHW
heating:
■ Central heating:
– For heating circuits in the heating
program "Heating and DHW":
in these heating circuits, the rooms
are heated to the selected reduced
room temperature (see page 22).
– For heating circuits in the heating
program "Only DHW":
No central heating in these heating
circuits.
Comfort and energy saving functions
Selecting energy saving function "Economy mode"
5592 675 GB