Viessmann GC1 - Stopping the Central Heating

25
Example:
Change the heating curve slope to 1.5.
A graph clearly shows the change in the
heating curve as soon as you alter the
value for the slope or level.
Heating curve
Change with
(
HC1
Slope
1.5
100°C
20 10 0
-10
-20
-30
41°C
55°C
68°C
81°C
23°C
Depending on various outside tempera-
tures (shown on the horizontal axis), the
assigned set flow temperatures for the
heating circuit are highlighted white.
Stopping the central heating
Extended menu
1.
2. "Heating"
3. Select the heating circuit if necessary
(see page 21).
4. "Heating program"
5. "Only DHW" (summer mode, no cen-
tral heating)
or
"Standby mode" (frost protection
monitoring)
Central heating
Changing the heating curve
(cont.)
5592 675 GB