ViewSonic PG707W User Manual

31
Operation
Turning the Projector On/Off
Starting Up the Projector
1. Press the Power buon to turn on the projector.
2. The lamp will light up, and a “Power On/O Ring Tone” will play.
3. The Power Indicator Light stays Green when the projector is On.
NOTE:
• If the projector is sll hot from previous use, it will run the cooling fan for 90
seconds before acvang the lamp.
• To maintain lamp life, once you turn the projector On, wait at least ve (5)
minutes before turning it o.
4. Turn on all of the connected equipment, i.e. notebook, and the projector will
start to search for an input source.
NOTE: If the projector detects an input source, the Source Selecon Bar will appear. If
an input source is not detected, the message, ‘No Signal’ will appear.
First Time Activation
If the projector is activated for the first time, select your OSD language following
the on-screen instructions.

ViewSonic PG707W Specifications

General

Type	lamp
Color	white
Display	dlp
Throw Type	standard throw
Portable	fixed
White Brightness	4000 lumens
Resolution	800p
Native Resolution	1280 x 800
Contrast Ratio	22000:1
Aspect Ratio	16:10
Throw Ratio Range	1.21 -1.57:1
Minimum Screen Size	29.9 inches
Maximum Screen Size	300 inches
HDMI Ports	1
Video Input	composite video, hdmi, vga
Inputs	usb, composite video, vga, rca, 3.5mm audio
Built In Speakers	yes
Speakers Output	10 watts
Remote Control	yes
OS Compatibility	none

Weight and Dimensions

Depth	8.6 inches
Height	4.3 inches
Width	11.6 inches
Net Weight	5.1 pounds