90
Glossary
This section describes the standard glossary of terms used in projector models. All
terms are listed in alphabetical order.
NOTE: Some terms may not be applicable to your projector.
A
Aspect Ratio
Refers to the ratio of the image width to the image height.
Auto Sync
Built-in intelligent auto adjustment function that will re-adjust the
frequency and clock values to provide the best picture quality.
B
Blank
Temporarily hide the screen image to maintain audience focus when
necessary.
Brightest Mode
Maximizes the brightness of the projected image. This mode is ideal for
environments where extra-high brightness is required, such as using the
projector in well lit rooms.
Brightness
Adjusts brightness levels of the screen image.
C
CEC (Consumer Electronics Control)
Synchronizes power on/off operation via HDMI connection. That is, if a
device that also supports CEC function is connected to the HDMI input of
the projector, when the projector’s power is turned off, the power of the
connected device will also be turned off automatically. When the power of
the connected device is turned on, the projector’s power will be turned on
automatically.
Color
Adjusts the color saturation.
Color Mode
The projector is preset with several predefined color modes to suit
operating, environmental, and input source needs.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
