ViewSonic PG707W User Manual

37
Controlling the Projector through a LAN Environment
The projector supports Crestron® software. With correct settings for the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same
local area network.
Configuring the LAN Control Settings
• If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port.
2. Open the OSD menu and go to the ADVANCED > LAN Control Settings menu.
Press Enter to display the LAN Control Settings page. Or you can press Network
to open the LAN Control Settings menu directly.
3. Highlight LAN Settings and press / to select DHCP ON.
4. Press to highlight Apply and press Enter.
5. Please wait for 15 - 20 seconds, and then re-enter the LAN Settings page. The
Projector IP Address, Subnet Mask, Default Gateway, DNS Server sengs will
be displayed. Make note of the IP address displayed in the Projector IP Address
row.

ViewSonic PG707W Specifications

General

Type	lamp
Color	white
Display	dlp
Throw Type	standard throw
Portable	fixed
White Brightness	4000 lumens
Resolution	800p
Native Resolution	1280 x 800
Contrast Ratio	22000:1
Aspect Ratio	16:10
Throw Ratio Range	1.21 -1.57:1
Minimum Screen Size	29.9 inches
Maximum Screen Size	300 inches
HDMI Ports	1
Video Input	composite video, hdmi, vga
Inputs	usb, composite video, vga, rca, 3.5mm audio
Built In Speakers	yes
Speakers Output	10 watts
Remote Control	yes
OS Compatibility	none

Weight and Dimensions

Depth	8.6 inches
Height	4.3 inches
Width	11.6 inches
Net Weight	5.1 pounds