46
For more information, visit http://www.crestron.com &
www.crestron.com/getroomview.
Crestron RoomView
On the “Edit Room” page, enter the IP Address (or hostname) as shown on the
projector’s on-screen display (OSD) menu, and “02” for IPID, “41794” for the
reserved Crestron control port.
Please go to the below website to get the RoomView™ User Guide and more
information:
http://www.crestron.com/products/roomview_connected_embedded_
projectors_devices/resources.asp
PJLink™, SNMP, AMX and Xpanel Formats Supported
This projector is PJLink™, SNMP V.1, AMX or Xpanel V1.10 compliant. For details,
please follow its user guide or website respectively to control and manage
projectors.
NOTE: PJLink™ can only be used when the password for Network Control has been
set.
To Next Page
Loading...
