63
Menu Option Description
Standby Settings
The functions below are available in standby mode (plugged in,
but not turned on).
VGA Loop Through
When selecting On, the projector outputs the signal received
only from COMPUTER IN.
Audio Pass Through
When selecting On, the projector outputs an audio signal when
the Audio In and Audio Out sockets are correctly connected to
a proper device.
Quick Power Off
Enable
The projector will not enter the cooling process after being
shut down.
Disable
The projector will enter the normal cooling process after being
shut down.
NOTE: If you aempt to restart the projector right aer it’s been
turned o, it may not be turned on successfully and will
rerun its cooling procedure.
USB A Power
When On, the USB Type A port can supply power, and the
Control Method will automatically switch to RS-232.
To Next Page
Loading...
