ViewSonic SC-T46 - Page 131

Conguring Client Settings
Conguring Service Access Settings
120
120
Remote Audio Recording
Click the drop-down menu to congure the audio playback setting in a Remote
Desktop session. Two options are available: Recording from this computer
and Do not record.
Option Description
Recording from this
computer
Allows audio recording in a Remote Desktop
session using locally attached audio devices.
Do not record
Disables audio recording in a Remote Desktop
session using locally attached audio devices.
RemoteFX USB Redirection Settings
Item Description
Use RemoteFX USB Redirection
Check/Uncheck to enable/disable locally attached USB devices in a Remote
Desktop session (virtual machine based only).
NOTE: RemoteFX USB Redirection allows the redirection of USB devices into
server-hosted virtual machines (with guest operating systems).
NOTE: RemoteFX USB Redirection is only applicable to the virtual machine based
Remote Desktop service not to session based one. For more information,
please visit Microsoft Support website at support.microsoft.com.
On the client side, please do the following to enable locally attached USB devices
in a virtual machine based desktop:
1. Ensure that the desired USB device has been connected to your client.
2. Ensure that RemoteFX is enabled on your SC-T46 (see “Use RemoteFX” on
page 118).
3. Click to check Use RemoteFX USB Redirection.
4. A new checkbox appears with the required device driver. Check to enable
the driver.
5. Click Save to apply.
NOTE: You also need to congure the host server and its guest OSs to enable
RemoteFX USB Redirection in a Remote Desktop session. For instructions
on server-side conguration, please visit Microsoft Support website at
support.microsoft.com.
RD Gateway Sub-tab
Connection Settings
Item Description
Use RD Gateway server
Check/Uncheck to enable/disable the use of an RD Gateway server. When
checked, the following two items in this table appear.
Server Name
Type the name of the RD Gateway server. Ask the network administrator for
this information.
Use my Remote Desktop
credentials for the RD Gateway
Check to use the same set of credentials for authenticating to both the Remote
Desktop computer and the RD Gateway server.
Bypass RD Gateway for
local address
Check to prevent trafc to and from local network addresses from being routed
through the RD Gateway server. This could make your RDP connection faster.