ViewSonic SC-T46 - Page 91

Conguring Client Settings
Conguring Network Settings
80
80
4. Type in the IP address, subnet mask, and gateway for your SC-T46 thin client.
NOTE
• Consult your network administrator for a free IP address and other required data
about the network to which your SC-T46 connects.
• The red asterisks indicate the required elds.
5. Click Save to apply.
NOTE
• You need to further specify DNS server addresses manually if you choose to use a
static IP address.
Obtaining DNS Server Addresses Automatically
To obtain DNS Server addresses automatically, please do the following:
NOTE
• You cannot obtain DNS server addresses automatically through the DHCP server if
you choose not to get the IP address via the DHCP server.
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Dynamic DNS (via DHCP) for the DNS type eld.
3. Click Save to apply.
Specifying DNS Server Addresses Manually
To specify DNS Server addresses manually, please do the following:
1. On ViewSonic Client Setup, click Network > Ethernet.
2. Under the DNS section, click the drop-down menu to select Manual setting.
3. The Search domain, Nameserver 1, and Nameserver 2 elds appear in the DNS section.