10
41018
The following is possible from the Display:
• Calling via the contacts list of the Outdoor Station on which it is installed.
• Calling an Indoor Station from the keyboard (only if the Outdoor Station is fitted with a keyboard art. 41019)
• Viewing Outdoor Station state indications (call in progress, talking and load control system states)
• Managing the Outdoor Station and display configuration parameters from the programming menu
1. Press to select the Contacts List
2. Press to confirm
3.
Select the name to call (only if the contacts list filters are enabled) or using the keyboard multitap
system
4. Press to confirm
5. The call is under way, press to end it
1. From the list of names in the contacts list, press the letters forming the name on the keyboard.
Each button must be pressed repeatedly until the desired letter appears on the display.
2. Select the desired name from the list of names that match the filter
3. Press to confirm
The letters entered are displayed at the top of the display
If necessary delete the filter with button C
Functions
Calling an indoor station from the contacts list
Searching for a name in the contacts list using the keyboard (multitap)
Annulla
Cancel
Users
Contacts
List
Switchboard
Select
WITH SWITCHBOARD
Contacts
List
Press
WITHOUT SWITCHBOARD
1 3
2 2 4 5
2
3
1
To Next Page
Loading...
Need help?
General
