5
41018
Operation
In stand by, the Display shows a Home Page, which contains the elements necessary to access the functions available.
The functionality and consequently the appearance of the Home Page vary according to the contacts list programming
(up to 8192 entries) and the entry control codes (up to 2000 codes for Due Fili Plus installations).
Both can be programmed using the configuration software on a PC, or directly using the related display
configuration menu (only for Due Fili Plus installations).
When first switching on, without having programmed any contacts list, the device looks like this:
Note: the contacts list (up to 8192 entries) and the entry control codes (up to 2000 codes for Due Fili Plus installations)
can be programmed using the configuration software from a PC, or directly from the related display configuration menu
(only for Due Fili Plus installations).
After programming the contacts list, the standby view looks like this:
Once the display has been programmed, you can decide how to view the functions on the Home Page in the section:
Programming/Display/Navigation
Without a keyboard With a Switchboard With Switchboard and keyboard
Contacts
List
Press
Contacts
List
Switchboard
Contacts
List
Switchboard
Indoor
station
Without a keyboard With a keyboard installed
Interno
Indoor
station
Press
Direct
Interno
Contacts
List
Switchboard
Indoor
station
Navigable
Contacts
List
Switchboard
Indoor
station
Expanded
RICERCA
PER NOME
CHIAMATA
PER N°
APERTURA
CON CODICE
CHIAMATA A
CENTRALINO
SEARCH
BY NAME
CALL
BY NO.
OPEN
WITH CODE
CALLING A
SWITCHBOARD