9
41018
Notification messages
Following an event, the display shows a series of notification messages:
For example, the following screen appears in the device start-up phase and requires waiting for the start-up phase to
complete.
Action required notification Action required
Loading... Wait for the start-up phase to complete
Communication Timeout Check the module connections and restart the electronic unit.
Registration Error Check the module connections and restart the electronic unit
UPGRADE THE MODULES
For Due Fili Plus installations: upgrade the display module and the audio/video
module to the latest FW release, which can be downloaded from the Vimar website,
along with SaveProg.
For IP installations: Secondary module firmware updating in progress.
If this persists for more than 1 minute, upgrade the audio/video unit firmware using
the Video Door IP Manager software.
Comm. Error If the problem persists, please contact customer service.
UPGRADE TO FONTS v.1
Update the fonts on the display to version 1 using SaveProg, using SaveProg version
3.1.1.12 or later.
CHECK THE CONNECTIONS Check the connection to the electronic module and restart the device.
INCORRECT INSTALLATION
Incorrect installation.
Check the guidelines provided in the instructions.
Uploading...
Start-up
To Next Page
Loading...
Need help?
General
