Vimar ELVOX 41018

61
41018
Info
System
This section is used to view the firmware versions of the devices installed on the Outdoor Station, the type of installation
and the ID of the Outdoor Station.).
This section is used to restore the factory settings of the various devices or to restart the Outdoor Station
1. Type of installation (horizontal/vertical)
2. ID of Outdoor Station with which the module is connected
3. Firmware version
1. Press to select the type of reset or system restart
2. Press to activate the procedure
Reset Settings
Restores the factory default settings of the display module.
The values restored are: Language, Colour, Home Page, Font, Brightness, Standby and
the Administrator/Installer Passwords
Reset Outdoor Station
Restores the factory settings of the Outdoor Station
Reboot Outdoor Station Reboot Outdoor Station
Restart System
Restarts the entire Due Fili system
External memory reset
Deleting of any names in the Contacts List, access codes and push button remapping,
Actuators, Access tags and Logos
Av fw ver
audio video module version
lcd fw ver display module version
Kp. fw ver keyboard version
Rfid fw ver
RFID module fw version
Fp fw ver
Fingerprint module fw version
Info
Installation
Ver
Outdoor Station ID
1
AV FW ver
1.73
LCD FW ver
1.50
Kp. fw ver
1.30
Back
1
2
3
System
Reset Settings
Reset Out.St…
Restart Out St.
Restart System
Reset Memory…
Back
1
System
Reset Settings
Reset Out.St…
Restart Out St.
Confirm
Cancel
2