30
41018
1. Press to select one of the entries.
2. Press to confirm.
Accesses
This section is used to manage codes, access tags and the associated system actuators.
For both accesses (codes or tags) and actuators, the following is possible:
– Edit/insert an access or actuator
– Delete a specific access or actuator
– Simultaneously delete all accesses or actuators
Access Codes
Edit/Enter
This section is used to manage the access codes associated with an actuator
These sections are used to edit an existing code or enter a new one, associating it with an actuator.
The data fields to enter are the same for both the entry and the edit function.
1. Press to select the actuator
2. Press to confirm
3. Enter the code on the keyboard
4. Press to confirm
Accesses
Access Codes
Access Tag
Actuators
Back
Codes
Edit
Add
Delete
Del. All
Back
1
2
Actuators
F1 ENTRANCE
PAN.
ENTR.PAN.LOCK
ID
123
Confirm
Back
1
2 4
3
To Next Page
Loading...
Need help?
General
