49
41018
Automatic Indoor Station Routing
Routing
This procedure allows the automatic routing of the Indoor Stations and Outdoor Stations
N.B.: the Electronic unit from which this configuration is performed, if vertical, must be Master. Whereas if it is horizontal,
it must function as Master via appropriate programming of one or more routers Art. 69RS.
Caution: the main Indoor Station must be assigned first, followed by its secondary Indoor Stations, where present.
*Note: the assignment varies according to the Indoor Station used, see specific documentation for details
1. Press to start the procedure, the audio/video electronic unit push buttons flash slowly
2. Press the push button from which the automatic assignment of IDs to Indoors Stations requesting it will begin
3. Within 5 minutes, request the assignment from an Indoor Station (*).
4. After each successful assignment, the Electronic unit automatically emits a verification call towards the recently
encoded Indoor Station
Addressing
Indoor Stations
Outdoor Stations
Routing ...
Back
1
Indoor Station Routing
Start Procedure
2
< 5m
beep
3
4
To Next Page
Loading...
