51
41018
Automatic Outdoor Station Routing
Note: only do this in the Outdoor Station which you wish to assign the Master ID to (ID=1). The procedure works with
Outdoor Stations which support the automatic assignment of IDs.
Note: the Outdoor Station from which the procedure is launched becomes the Master, regardless of the ID it had
previously and the IDs of the other Outdoor Stations.
The other Outdoor Stations with the ID already assigned and that are not the Master do not participate in the ID
assignment procedure.
1. Press to start the procedure
2. During the ID search, the push buttons on the Outdoor Stations involved turn on in turn clockwise, whereas during
the ID uniqueness check, all the push buttons flash simultaneously
3. At the end of the procedure, a confirmation screen is displayed and the Outdoor Station emits a sound
Routing
Indoor Stations
Outdoor Stations
Routing ...
Back
1
Outdoor Station Routing
Start Procedure
2
Outdoor Station Routing
End Procedure
3
beep
To Next Page
Loading...
