About this manual Manual VIPA System 200V
ii HB97E - SM-AIO - Rev. 12/32
About this manual
This manual describes the analog signal modules (SM) and the
Combination module 238-2BC00 of the System 200V from VIPA. In
addition to the product summary it contains detailed descriptions of the
different modules. You are provided with information on the connection and
the utilization of the System 200V SM modules.
Chapter 1: Assembly and installation guidelines
The focus of this chapter is on the introduction of the VIPA System 200V.
Here you will find the information required to assemble and wire a
controller system consisting of System 200V components.
Besides the dimensions the general technical data of System 200V will be
found.
Chapter 2: Analog input modules
This chapter contains a description of the construction and the operating of
the VIPA digital input modules.
Chapter 3: Analog output modules
This chapter contains a description of the construction and the operation of
the VIPA digital output modules.
Chapter 4: Analog input/output modules
This chapter contains a description of the construction and the operation of
the VIPA digital input/output modules.
Chapter 5: 238-2BC00 - Combination module
In this chapter follows the description of the Combination module SM 238C
that includes a digital in-/output module with counter function and an
analog in-/output module.
Overview
To Next Page
Loading...