Version 1.2
Operating and Assembly Instructions
Dispenser RD-EC 25 / 27
7 Technical specification
7.1 Declaration of incorporation
within the meaning of EU Directive 2006/42/EU on machinery Annex II B
We,
ViscoTec – Pumpen- u. Dosiertechnik GmbH
Amperstr. 13, 84513 Töging
hereby declare that in the design and manufacture of the incomplete machine described
below that the following basic requirements of EU Directive 2006/42/EU had been applied
and complied with: 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.5.4, 1.6.1, 1.6.2, 1.7.4, 1.7.4.1, 1.7.4.2
We declare in addition that the special technical documents were drawn up in accordance
with Annex VII part B of this Directive. The incomplete machine corresponds in addition
in the event of applicability to the stipulations of Directives 2006/95/EU for electrical
equipment and 2004/108/EU with regard to electromagnetic compatibility.
Product designation Dispenser RD-EC
We undertake to convey to the market supervisory authorities at their justifiable request
the special documents on the incomplete machine in electronic form to their
documentation department.
The incomplete machine may only be put into operation once it has been determined, as
required, that the machine or unit into which the incomplete machine is to be installed
complies with the stipulations of Directive 2006/42/EU on machinery and that the EU
Declaration of Conformity has been produced in accordance with Annex II A.
Töging, 16.04.13
Georg Senftl
Managing director and authorised for the
compilation of the technical documents.
See above for the address.
To Next Page
Loading...
Need help?
General
