20
Base Station Operation
Follow these steps to initiate a call from the base station to an intercom station:
1. From the VS4500 Page To menu, enter an Intercom device number as a 3 digit number (for example, “501”).
2. Wait for the call to be accepted by the party on the intercom station (the intercom station will sound beeping tones to
alert of the incoming call).
Note: Systems set to hands-free operation do not require the intercom station to accept the call.
3. Once the call request was accepted, the STATION IS ON message will be displayed on the VS4500. Press and hold the
PTT button on the microphone while speaking.
4. Press the * key to end the conversation.
Follow these steps to answer a call from an intercom station:
1. When an intercom station is initiating a call to the base station, the base station will sound beeping tones to alert of the
incoming call. Press the # key to accept the call.
2. Press and hold the PTT button on the microphone while speaking.
3. Press the * key to end the conversation.
Intercom Station Operation
Follow these steps to initiate a call from an intercom station to the base station:
1. Push the button on the intercom station.
2. Wait for the call to be accepted by the party on the base station (the base station will sound beeping tones to alert of the
incoming call).
3. Once the call request was accepted, press and hold the button on the intercom station while speaking.
Note: Systems set to Full-Duplex or Hands-Free operation do not require the user to press and hold the button while
speaking.
Follow these steps to answer a call from the base station:
1. When a base station is initiating a call to the intercom station, the intercom station will sound beeping tones to alert of
the incoming call. Press the button on the intercom station to accept the call.
Note: Systems set to Hands-Free operation do not require the user to press the button to accept the call. The call is
accepted automatically as soon as the request is received from the base station.
2. Press and hold the button on the intercom station while speaking.
Note: Systems set to Full-Duplex or Hands-Free operation do not require the user to press and hold the button while
speaking.
3. For systems set to Hands-Free operation: Press the intercom button to end the conversation.
3.7 Background Music (FM Radio) Setup on Wireless Amplifiers
Note: Background FM radio music feature is supported by wireless amplifiers (such as VNS2200) equipped with the
VNS2265 option). A Local dedicated FM radio transmitter is required and it has to transmit on the frequency supported by
the wireless amplifier.
Since the VS4500 does not utilize a full keyboard, use the VPS software to send the alphanumeric commands (see ).
Follow these steps to activate or deactivate the FM radio background music on wireless amplifiers:
1. Program an alphanumeric device in to the VS4500. Verify that the wireless amplifier / speaker capcode was programmed
properly (Device Type should be set to Alphanumeric Pager).
2. Connect to the VS4500 using the VPS software and click on System Devices & Messaging.
3. On the VPS software device list, click on the alphanumeric device programmed on step 1.
4. To activate the FM radio background music for a specific time interval, enter a message using the GMthvds format in
the VPS software message field:
t is always 95
h is hundredth digit of the time interval (digit between 0 and 9)
To Next Page
Loading...